Save the current settings as default, so if you open.The Services menu contains the “Volume Setup” submenu where you may: The range is from -9 dB to 9 dB with 1 dB step. The volume correction is individual for each button (for each simulated device). If most of the energy is placed at frequencies where the simulated devices have relatively high or low sensitivity, the result may sound softer or louder than the original. The basic MixChecker screen offers the effective environments.Īlthough the simulations are volume neutral for average recordings, some materials require a volume correction. Simply, in some cases, the compensation may make the simulation results even worse. If we would take a speaker with a peak at 520 Hz and another speaker with 500 Hz, we could not use a compensation with the average value – the result would be decreased volume at 510 Hz (average compensation) for both speakers and the peaks at 500 and 520 Hz would remain. For a quick check of the recorded material (simulation) we may use the average values of the frequencies with attenuated or increased volumes.
The frequency characteristics of real-world devices have many peaks and notches. Why the compensations disappeared MixChecker could have average characteristics for simulated devices but it would require exact characteristics of the speakers used for monitoring. Once the checking is finished, we suggest to fully bypass the plug-in (not only deselecting the simulations).
0 kommentar(er)
